Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.

Pete




We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.

"Sjouke Burry" wrote in message
...
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.

Pete




We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.

But this is going into a hole that was already drilled for the
part.

Pete Bertini wrote:
"Sjouke Burry" wrote in message
...
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.

Pete




We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.

But this is going into a hole that was already drilled for the
part.


Pete, I have some that *might* work. Hard to tell exactly. These have
a 10mm long threaded portion.

-Bill

"Bill M" wrote in message
...
Pete Bertini wrote:
"Sjouke Burry" wrote in message
...
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.

Pete




We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.

But this is going into a hole that was already drilled for the
part.
Pete, I have some that *might* work. Hard to tell exactly. These have a
10mm long threaded portion.

-Bill

Hi Bill

Regular style has about 7 threads, mine has 11, plus there is a shouldered
area between the panel stop and first thread that is probably equal to
the area that would be used by another four threads.

Pete

"Bill M" wrote in message
...



Pete, I have some that *might* work. Hard to tell exactly. These have a
10mm long threaded portion.

-Bill

Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

Pete

Pete Bertini wrote:
"Bill M" wrote in message
...


Pete, I have some that *might* work. Hard to tell exactly. These have a
10mm long threaded portion.

-Bill

Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

Pete


Glad they worked out.

-ex

On 4/16/2010 8:31 PM, Pete Bertini wrote:
Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

I recognize that number, you're working on one of the plug-ins for the
141 spectrum analyzer.

Jeff

"Jeffrey Angus" wrote in message
...
On 4/16/2010 8:31 PM, Pete Bertini wrote:
Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

I recognize that number, you're working on one of the plug-ins for the
141 spectrum analyzer.

Jeff

Hi Jeff

Yeppurs. For some odd reason folks used these for bean toss
games. I've seen quite a few with damaged BNC jacks!
I only had one deck out of several that had a damaged jack.
Now all three of the 141Ts are populated and working!

Pete

"Jeffrey Angus" wrote in message
...
On 4/16/2010 8:31 PM, Pete Bertini wrote:
Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

I recognize that number, you're working on one of the plug-ins for the
141 spectrum analyzer.

Jeff

Hi Jeff

Yeppurs. For some odd reason folks used these for bean toss
games. I've seen quite a few with damaged BNC jacks!
I only had one deck out of several that had a damaged jack.
Now all three of the 141Ts are populated and working!

Pete

Pete Bertini wrote:
"Bill M" wrote in message
...


Pete, I have some that *might* work. Hard to tell exactly. These have a
10mm long threaded portion.

-Bill

Bill's BNCs worked perfectly. Extra long shafts. Was able to fix
the remaining damaged HP 8552B IF deck this evening.

Pete


Glad they worked out.

-ex