| Home |
| Search |
| Today's Posts |
|
#1
April 10th 10, 07:46 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
Need a few BNC chassis mounts
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete |
|
#2
April 10th 10, 08:08 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. |
|
#3
April 10th 10, 08:08 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. |
|
#4
April 10th 10, 08:11 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
"Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. |
|
#5
April 10th 10, 08:11 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
"Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. |
|
#6
April 11th 10, 01:57 AM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
Pete Bertini wrote:
"Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill |
|
#7
April 11th 10, 01:57 AM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
Pete Bertini wrote:
"Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill |
|
#8
April 12th 10, 03:35 AM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete Bertini wrote: "Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Hi Bill Regular style has about 7 threads, mine has 11, plus there is a shouldered area between the panel stop and first thread that is probably equal to the area that would be used by another four threads. Pete |
|
#9
April 12th 10, 03:35 AM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete Bertini wrote: "Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Hi Bill Regular style has about 7 threads, mine has 11, plus there is a shouldered area between the panel stop and first thread that is probably equal to the area that would be used by another four threads. Pete |
|
#10
April 12th 10, 03:43 AM
posted to alt.binaries.pictures.radio
|
|||
|
|||
|
Need a few BNC chassis mounts
On 2010-04-10 10:46:53 -0700, "Pete Bertini" said:
Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck Pete, see the drawing I posted today under heading BNC Connector. Amphenol part number 112429, there's a distributor with stock in California. Mouser quoting 10-week leadtime. About $3. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mobile mounts | Equipment | |||
| MILITARY MOUNTS | Boatanchors | |||
| UHF Mounts ?? | CB | |||
| Universal Mounts | Swap | |||
| FS: Two mobile antenna mounts | Swap | |||
Linear Mode
