Ok, I need an antenna that performs equally well on VHF-lo and VHF-
hi... that's all I need. I've love to get the Scantenna, but I've
heard people say that it's performance is "so-so" on VHF lo. I need
great performance on both. A beam would probably be preferred.

Anyone have some resources where I can build my own antenna? I'm
wondering, however, if it would be better to purchase an antenna if I
need good performance on all of VHF-low (30-50Mhz) and VHF-hi
(148-174MHz).

On 12 Feb 2007 17:18:53 -0800, "anonymous_c" wrote:

Ok, I need an antenna that performs equally well on VHF-lo and VHF-
hi... that's all I need. I've love to get the Scantenna, but I've
heard people say that it's performance is "so-so" on VHF lo. I need
great performance on both. A beam would probably be preferred.

Anyone have some resources where I can build my own antenna? I'm
wondering, however, if it would be better to purchase an antenna if I
need good performance on all of VHF-low (30-50Mhz) and VHF-hi
(148-174MHz).


forget about building it ....... it's too big and too complicated of
a job for what you want. better is to get a low band / high band TV
antenna ( channels 2 and up ) , the bigger the better and turn it
vertical for scanner use.. then get a suitable rotor and the
highest mast you can install , for any hope of success for the
distance you want to cover. a low noise stridsberg preamp and 50
ohm to 300 ohm balun are probably in the mix as well.

any serious multi element beam for 30 - 174 mhz and up is gonna be
a huge antenna . 12' to 16' long would be in the ball park for
all the freqs and distance you want . the antenna above is still
not large enough for perfect operation below 35 - 45 mhz or so .....
but more realistic than a dedicated 30 mhz 5 element beam.
( ie: 20' boom at 30 mhz )
http://www.cebik.com/a10/ant29.html

just my thoughts on your question ....