Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
On Thu, 23 Aug 2007 10:17:09 -0400, "Radiosrfun"
wrote: :"Crackles McFarly" wrote in message . .. : 029047 -- Are you suppose to Begin the code with the Zero? : : Is it suppose to be 6 digits and if no number starts the 2nd of 6 : digits, you're suppose to add a zero to the front? : : A county for example is 21099 as listed with NWS, am I suppose to add : a zero to the front, making it 021099??? : : I set the radio up this way and did not receive the test signal : weekly. NWS guy told me Wednesdays 10am-noon was the time, it never : happened. : I'm quite concerned that this radio does not seem to currently have : the ability to alert me to even a TEST signal.. : : It's Midland Model #74-250 : Here's the Manual for it : http://www.midlandradio.com/comersus...log/74-250.pdf : : : thanks if you can help me.. snip helpful hints and info offered... :I'm not trying to be smart by saying this, but it would be a help if you go :back through the manual and "READ" it - play with buttons, change settings :to get used to them and then set it as you wish - to familiarize yourself :completely with the radio. Once you get to know the radio better- maybe you :can better figure out what the issue is you are having. Not having one in :hand - those of us trying to help - are sort of helpless. : :This is about all I can offer - if you keep having issues, try contacting :Midland - http://www.midlandradio.com/ they have a "Contact us" button :there. : :I think I'm out of help for you at this stage. Good luck. : :L. Yep, me too. It helps to read the manual plus Google shows there is a wealth of info available if you actually try and look for it. ![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
re-entering ham radio | CB | |||
re-entering ham radio | Policy | |||
re-entering ham radio | Swap | |||
Icom R5 Receiver - Entering Frequency | Scanner | |||
WEATHER ALERTS | Scanner |