Subject: Scanner won't pick up my GMRS radio--why?
From: (Dan Richman)
Date: 2/11/2004 2:55 PM Pacific Standard Time
Message-id:

i just programmed my new PRO-95 with the GMRS frequencies, but when i
key my GMRS radio, even from across the room, the scanner stops on the
freq but produces only static and a barely readable signal. any idea
why that might be? shouldn't i be picking up the signal perfectly?

my two Vertex VX-400 radios, which i'm using for GMRS, communicate
perfectly with each other and with several off-the-shelf FRS/GMRS
radios.

thanks for any ideas why this might be happening!

dan richman








I have a Radio Shack PRO-38 and I can receive the GMRS and FRS Frequencies, if
I try to listen to myself while using the GMRS/FRS radio in the same room as
the scanner I get some static in my reception of the signal.

Tuxedo Darien

On 17 Feb 2004 10:38:18 GMT, est (JerrSingle)
arranged phosphur particles on my screen with the following:

(snipped)

I have a Radio Shack PRO-38 and I can receive the GMRS and FRS Frequencies, if
I try to listen to myself while using the GMRS/FRS radio in the same room as
the scanner I get some static in my reception of the signal.

Tuxedo Darien


.....then your undies must be ungrounded silk. Try changing to cotton.

Be advised that gmrs has PL tones you may want to consider turning off before you transmit and try to receive on scanner