No service manual or parts available from Radio Shack for the Pro-43.
Checked BNC and is tight. From previous post i have checked coils and
all look good.



kevcat wrote in message ...
sounds like it
a broken connection between the antenna connector and the board, is the
BNC socket also loose?, good sign

Kev

Bo Harris wrote:

Thanks Mike. I'm looking into that now. It has to be kind of simple to
fix since the radio IS working.

mikeBNF wrote:

a common problem is the wire to the pcb from the socket twisting and
breaking the joints and the first surface mount coil going o/c or lifting.
mike

"Bo Harris" wrote in message
...

I need a Pro-43 Service manual in a bad way. I have a Pro-2006 service
Manual i can copy for trade. If anything, I need a copy of the schematic
for the boards. I bought a used 43 and the signal is very weak. It's
tuned but takes a very strong signal to break squelch. It has been
bench tested to prove this.



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.783 / Virus Database: 529 - Release Date: 25/10/2004