radio shack in the u.s. also has a 1:1 transformer wired up for stereo's,
you would only need to use one side of it for mono.

part number 270-054




"Ken Bessler" wrote in message
news:MF%Wd.309$Fy.76@okepread04...
wrote in message
...
On Sun, 6 Mar 2005 22:31:11 -0600, in rec.radio.scanner "Ken Bessler"
wrote:

wrote in message
news

I am broadcasting my scanner over the internet and the sound is fine
until
it
gets to the 460 range and then there is a hum. I went out and bought
a
shielded
cable for my scanners connection to the sound card but it did not
help.
Any
suggestions on how to fix this?

Try a 0.1 uF Tantalum cap on the center conductor. IOW, interrupt the
center conducter and install the cap inline between the scanner and
sound
card. Also, I would strongly suggest you install a 1:1 isolation
transformer
between the cap and scanner.


Thanks.. this is beyond my capabilities.. is it possible to buy
something
like
that?


You could buy a rigblaster. They do all the level interfacing for you. Or,
you could buy the part from Radio Shack. P/N is 272-1434 $1.59

--
73's es gd dx de Ken KGØWX
Grid EM17ip, Flying Pigs #1055,
List Owner, Yahoo! E-groups:
VX-2R & FT-857