Hi,

Does anyone have or know where i can find the pinouts/schematics to
make a PC cable for the AR8200 MKIII?

TIA

AJ.

In article , AJ.
writes

Does anyone have or know where i can find the pinouts/schematics to
make a PC cable for the AR8200 MKIII?

The AR8200 manual has details of the connections on the Remote socket on
the side of the radio. Note though that from around November 2000 there
was a change to the Violet and Blue wires.

http://www.aoruk.com/8200bulle.htm#sm8200_add

If you get the AOR "Open ended" cable (we call it the OS8200) then the
cable colours/connections will match the manual.

http://www.aoruk.com/pdf/os8200_ad.pdf

As for the actual "interface" there are quite a few designs that have
appeared on web sites over the years. Most normally make use of a Maxim
(or equivalent) MAX232 or 233 IC (the 233 doesn't need external
capacitors).


--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
Telephone 01274 639503 International: +44 1274 639503
http://www.javiation.co.uk

should be in manual if not contact AOR thr is an AOR office in Torrance
on Western Avenue...this is not far from 110 & 405 freeways

AJ. wrote:
Hi,

Does anyone have or know where i can find the pinouts/schematics to
make a PC cable for the AR8200 MKIII?

TIA

AJ.

AJ. wrote in news:7sin91pdav4jq3nsv8m7g5i50uj6tbt48s@
4ax.com:

Hi,

Does anyone have or know where i can find the pinouts/schematics to
make a PC cable for the AR8200 MKIII?

TIA

AJ.


Might try here http://www.pro-92.com/pcifcable.htm and check out the links
for two way cables that you can make for a little bit of nothing.
Obviously not specifically for the AE8200, but might well work nonetheless.