Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
One problem with rectifiers is that they ground and unground the
RF path 120 times a second (60 Hz) and unless bypassed will add a hum to a received station that has nothing to do with ripple. Many supplies have this fault. The effect is that the antenna system is changed 120 times a second. I say go with batteries. Having purchased NiMH cells and a charger, they're also useful for other devices. Get 8 AA cells to start, 4 in the radio and 4 charging. Don't let them run completely down. The clock in the 7600 will run them to zero, and unfortunately the weakest cell gets reverse-charged by the others if that happens, which is not good for that cell. -- Ron Hardin On the internet, nobody knows you're a jerk. |
#2
![]() |
|||
|
|||
![]()
In article ,
Ron Hardin wrote: One problem with rectifiers is that they ground and unground the RF path 120 times a second (60 Hz) and unless bypassed will add a hum to a received station that has nothing to do with ripple. Many supplies have this fault. Snip Wrong theory on the hum but the right solution. I've giver the reason for this a number of times and I'm not doing it again. Anyone that has build linear and switching power supplies knows the reason. -- Telamon Ventura, California |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Coax Adapters & Connectors | Swap | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Antenna | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Equipment | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Equipment |