Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 1st 07, 06:40 PM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 4,494
Default Time to throw in the towel on HD Radio !

In article
,
D Peter Maus wrote:

Stephanie Weil wrote:
On Aug 27, 12:38 pm, Bart Bailey wrote:

Orban's Opti-Mod I think it's called, and station personnel that can't
seem to resist adjusting them for maximum smoke.


Processors were always set "hot" way before IBOC came on the scene,
and I never heard station audio clip and distort the way it does now
on the analog side of AM HD. Reducing the available bandwith for
analog to +/- 5 khz to shoehorn the digital portion sure hasn't helped
either.

The whole idea with HD is that you have to back off on the processing
a bit. You can't overdrive digital the way you can with analog and
have it come out sounding good. It's like slightly overdriving a
recording on cassette tape vs. Minidisc. If you try it with Minidisc,
you hit a brick wall and everything above that starts sounding like so
much mush.

Stephanie Weil
New York City, USA



Clipping has been part of audio processing since the early days of
audio processing. It's usually inaudible. AM processing has been using
'smart' clipping for awhile, now. Smart clipping is not quite as
hard--rounded edges--but for a number of years CRL openly hard clipped
the composite baseband and let the **** fall into the filter where it may.

And not all analog clipping is that objectionable. It adds even order
harmonics, which are pleasing to the ear. If over done...well, that's
another story...but lightly, it can be a good thing...

One of the problems we have with digital audio, is the number of
analog engineers applyin analog thinking to digital audio. And this
applies to both recording and live audio, as well. You're right, digital
audio is a brick wall at '0', and anything beyond that becomes some
serious trash. Analog engineers, especially in the recording industry,
routinely try to recreate 'tape compression' at the top end, by driving
preamps and other pre conversion electronics mildly to their top end.
Especially if they're using tube preamps. This takes a delicate hand.
But who's that delicate is broadcasting, today? Not many.

The most common complaint I hear about HD reception, today, and this
applies to both AM and FM, is the audio quality isn't what is expected.
It's not CD quality, which according to Philips and Sony was only
supposed to be medium-fi in the first place. And the HD audio is nearly
always loaded with some kind of distortion artifact resulting from
trying to pack 5 lbs in a 4 lb bag.


Snip

The bit rate is not high enough for high quality sound.

--
Telamon
Ventura, California
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Don't throw away your maps. Unclaimed Mysteries Digital 2 December 28th 04 05:00 AM
Don't throw away your maps. Unclaimed Mysteries Digital 0 December 16th 04 06:54 AM
24 hrs after daylight savings time, and no Seattle area radio station is transmitting the correct RDS time! HireMe.geek.nz Shortwave 0 November 3rd 04 05:44 AM
// Bug alert : Radio Netherlands screen saver works on 'local time' not UTC time for computing daytime illumination of the sun // http://CBC.am/ Shortwave 0 August 11th 04 11:50 AM
Why Throw $$ to the ARRL??? Dr. A.T. Squeegee General 6 December 15th 03 10:48 PM


All times are GMT +1. The time now is 07:51 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017