Home |
Search |
Today's Posts |
#6
|
|||
|
|||
RF Filter PCBs
On Nov 3, 6:17 pm, wrote:
On Nov 3, 5:49 pm, Telamon wrote: In article .com, wrote: If you need to prototype or build a lumped element RF filter, check out the RF Filter PCBs at RF Bites. http://www.rfbites.com Those are not very good coax to PCB connectors. You can do better. Must be pretty low frequency stuff ( 1 GHz ) if you are using FR4. -- Telamon Ventura, California Connectors are rated to 12GHz. FR-4 is good up to 3.5GHz, then it starts to fall apart. Telamon, I would be glad to send you a spaned out response from the Net A. Let me know. FH |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RF Filter PCBs | Equipment | |||
Software DSP audio filter programs versus hardware audio filter DSP units | Shortwave | |||
AR88s and PCBs | Boatanchors | |||
where to get burs for Dremeling PCBs? | Homebrew | |||
Making PCBs | Homebrew |