LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old November 23rd 08, 07:29 PM posted to rec.radio.shortwave
RHF RHF is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 8,652
Default Adding Filters to R-5000 Receiver - Where to put them in IF board

On Nov 23, 5:02*am, Jim wrote:
Let's say you want to add the following filters to the R-5000:

YK-88SN *Narrow Sideband

YK-88C * 500 Hz CW

YK-88CN *250 Hz CW

YK-88A1 * AM Filter

Where would you install the 88C and 88 CN, as the instruction manual
shows the installation of EITHER 88C OR 88CN. *Is it possible to
install both? *If so, where would you put them?

Also, are the 88SN and 88A1 worth the cost, do they materially improve
selectivity? *

Anyone having hands on experience with these filters could you please
advise me?

Thanks for your help.

Jim


Jim,

First understand that the Kenwood R5000 Receiver
Filters are arranged in a Cascade {Series} Circuit :
With the Widest First and the Narrowest Last.

Looking inside the Kenwood R5000 Receiver
http://jvgavila.com/wb/drm_7.jpg

Kenwood R5000 Receiver Filter Sizes :
A - Kenwood YK88A-1 Plug-In AM/MW Filter @ @ 6khz
http://www.universal-radio.com/catal...xvr/yk88a1.jpg
-or- Blue INRAD Filter is the Plug-In AM/MW @ 6khz
http://jvgavila.com/wb/drm_4.jpg
B - Wide SSB Filter YK-88S @ 2.4 kHz
http://jvgavila.com/wb/drm_12.jpg
C - Narrow SSB Filter YK-88SN @ 1.8 kHz
D - Wide CW Filter YK-88C @ 500 Hz
http://www.universal-radio.com/catal...rxvr/yk88c.jpg
E - Narrow CW Filter YK-88CN @ 270 Hz

Kenwood R5000 Receiver Filter Locations/Positions :
1 - First Filter Position is Front Horizontal
{Side-to-Side} Plug-In Filter
* Start with your Widest Filter here.
2 - Second Filter Position is the Front Vertical
{Front-to-Back} Solder-In Filter
3 - Third Filter Position is the Rear Vertical
{Front-to-Back} Solder-In Filter
4 - Fourth Filter Position is Rear Horizontal
{Side-to-Side} Solder-In Filter
* Finish with your Narrowest Filter here.

International Radio [INRAD] Kenwood R-5000 Filters
http://www.inrad.net/home.php?cat=40

CHECK-OUT :
The Kenwood R-5000 Receiver Owners & User's Group
KENWOOD R-5000 RECEIVER = http://tinyurl.com/2o4z8k
Is your place on the WEB to use as a "Resource" for
General and Technical Information about the Kenwood
R-5000 Receiver and to Identifying Common Problems
and Simple Practical Solutions. http://tinyurl.com/2o4z8k
KWR5K = http://groups.yahoo.com/group/kenwood-r5000/
Shortwave Radio Listening Antennas "The Other" 55.5%
of SWLing - SWL ANTENNA = http://tinyurl.com/ogvcf
- = 2O4Z8K = -


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding DSP IF filters to commercial radios Rick (W-A-one-R-K-T) Equipment 1 August 13th 07 12:14 AM
FOR TRADE: LN kenwood r-5000 w/original boxes, filters and audio board. [email protected] Swap 0 December 19th 06 04:09 AM
FA: YAESU FT-847 with Voice Board and Filters $300+ value Bill G Swap 0 October 23rd 04 08:23 PM
Inrad filters f. R-5000 Which one ? Claus Shortwave 1 September 30th 04 10:25 PM
IAI2: Kenwood R-5000 Receiver + VC-20 +VS-1 + 4 Filters RHF Shortwave 2 October 24th 03 03:18 AM


All times are GMT +1. The time now is 08:24 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017