I copied WGBB 1240AM at 1:45am

From the info I gathered this station tx just 1,000 watts. :-)

I was using my GE P-780 with a loop made by D.Schmarder {sp} on my
lazy susan but I didn't fully copy the signal completely till I sat my
Radio Shack loop on the opposite side and tuned a little off the sweet
spot and then barely touched my bigger Penta-Loop and there it was
with nothing else in there.

I listened for almost ten minutes and then decided to call the radio
station and let them know and the guy got a kick out of it and gave me
a "shot out" on the radio when he went back on the air.

Pretty exciting and not bad for the old GE P-780, my modded DX394
hooked up to my AD DX Sloper couldn't even copy it. I hear another
station trying to get in there so I think I'm going to keep it parked
right here and see as the night goes on if another station pops in.
Thanks Brenda Ann:-)

Gregg wrote:
I copied WGBB 1240AM at 1:45am

From the info I gathered this station tx just 1,000 watts. :-)

I was using my GE P-780 with a loop made by D.Schmarder {sp} on my
lazy susan but I didn't fully copy the signal completely till I sat my
Radio Shack loop on the opposite side and tuned a little off the sweet
spot and then barely touched my bigger Penta-Loop and there it was
with nothing else in there.

I listened for almost ten minutes and then decided to call the radio
station and let them know and the guy got a kick out of it and gave me
a "shot out" on the radio when he went back on the air.

Pretty exciting and not bad for the old GE P-780, my modded DX394
hooked up to my AD DX Sloper couldn't even copy it. I hear another
station trying to get in there so I think I'm going to keep it parked
right here and see as the night goes on if another station pops in.
Thanks Brenda Ann:-)

From where? Graveyard channels are a very special kind of BCBDX. It
takes a lot of skill and patience.

On Dec 19, 6:25*am, dave wrote:

*From where? *Graveyard channels are a very special kind of BCBDX. *It
takes a lot of skill and patience.- Hide quoted text -

- Show quoted text -

I don't know about the skill part Dave but it definitely takes
patience. I would find myself at times kind of wrinkling my
forehead, know what I mean? Almost like squinting but
not, then catch myself and relax.

I know this one guy who has the P780 and he really has
his tricked out. One of the mods is he added a earphone
jack to his, that would definitely be a nice add on feature
to have.

Why do you say it's a very special kind of DX? I know there
is more hash and stations fighting to get in there if that's what you
mean.

Gregg wrote:
On Dec 19, 6:25 am, dave wrote:

From where? Graveyard channels are a very special kind of BCBDX. It
takes a lot of skill and patience.- Hide quoted text -

- Show quoted text -

I don't know about the skill part Dave but it definitely takes
patience. I would find myself at times kind of wrinkling my
forehead, know what I mean? Almost like squinting but
not, then catch myself and relax.

I know this one guy who has the P780 and he really has
his tricked out. One of the mods is he added a earphone
jack to his, that would definitely be a nice add on feature
to have.

Why do you say it's a very special kind of DX? I know there
is more hash and stations fighting to get in there if that's what you
mean.

I say it because there are lots of stations on those channels, and it
takes skill to separate them enough to positively ID one. Anybody can
hear a clear channel station.

On Dec 19, 6:25*am, dave wrote:
Gregg wrote:
I copied WGBB 1240AM at 1:45am

From the info I gathered this station tx just 1,000 watts. :-)

I was using my GE P-780 with a loop made by D.Schmarder {sp} on my
lazy susan but I didn't fully copy the signal completely till I sat my
Radio Shack loop on the opposite side and tuned a little off the sweet
spot and then barely touched my bigger Penta-Loop and there it was
with nothing else in there.

I listened for almost ten minutes and then decided to call the radio
station and let them know and the guy got a kick out of it and gave me
a "shot out" on the radio when he went back on the air.

Pretty exciting and not bad for the old GE P-780, my modded DX394
hooked up to my AD DX Sloper couldn't even copy it. I hear another
station trying to get in there so I think I'm going to keep it parked
right here and see as the night goes on if another station pops in.
Thanks Brenda Ann:-)

*From where? *Graveyard channels are a very special kind of BCBDX. *It
takes a lot of skill and patience.- Hide quoted text -

- Show quoted text -

I missed this the first time. You said "from where".....meaning
my QTH? Cincinnati, Oh. aka The Nati'

On Dec 19, 12:20*pm, Bob Dobbs wrote:
Gregg wrote:

I was using my GE P-780 with a loop made by D.Schmarder {sp} on my
lazy susan but I didn't fully copy the signal completely till I sat my
Radio Shack loop on the opposite side and tuned a little off the sweet
spot and then barely touched my bigger Penta-Loop and there it was
with nothing else in there.

You think all those loops were doing more enhancing the signal,
nulling the competition, or a combination of both?
In any case that's fun stuff playing with loops to dither reception,
I never used more than two at a time myself.

--

Operator Bob
Echo Charlie 42

Greg. Did you tell where your receiver was located? I didn't know
Schmarder was selling loops. I bought some litz off of him. Does he
have a website?

Loops are cool. I've got a big air loop. I've run across a dude
named stormwise and he sells some long ferrite rods. That's my next
project. If anybody wants more info on rods then ask.

NEO

WGBB Radio Station AM 1240 Long Island,New York.
Long Island's oldest Radio Station.
cuhulin

N9NEO wrote in news:db60029a-4e85-4242-9fa3-
:

On Dec 19, 12:20*pm, Bob Dobbs wrote:
Gregg wrote:

I was using my GE P-780 with a loop made by D.Schmarder {sp} on my
lazy susan but I didn't fully copy the signal completely till I sat my
Radio Shack loop on the opposite side and tuned a little off the sweet
spot and then barely touched my bigger Penta-Loop and there it was
with nothing else in there.

You think all those loops were doing more enhancing the signal,
nulling the competition, or a combination of both?
In any case that's fun stuff playing with loops to dither reception,
I never used more than two at a time myself.

--

Operator Bob
Echo Charlie 42

Greg. Did you tell where your receiver was located? I didn't know
Schmarder was selling loops. I bought some litz off of him. Does he
have a website?


http://makearadio.com/


I've seen Dave's collection of custom-made crystal radios and loops at
local hamfests. He's an excellent craftsman. He doesn't have a specific
"product line" - he just builds whatever strikes his fancy.

His web site has many project ideas, links to parts suppliers etc.

On Dec 19, 8:10*pm, Lopez Gomez wrote:

I've seen Dave's collection of custom-made crystal radios and loops at
local hamfests.

Have you really? Did you get to meet him by chance? I'd really like to
try
some of his radio and regen receivers, that would be a blast.



He's an excellent craftsman. He doesn't have a specific
"product line" - he just builds whatever strikes his fancy.

No doubt, he did a fantastic job on mine. What first caught me was
the look of the loop, I was hoping though that it worked as well as
it looked and it got to me without being killed in transit. Here is a
pic
of it. Scroll down to the "Five Sided Loop" - he named it "Penta-
Loop."
http://makearadio.com/loops/loops2.php

Gregg wrote in news:4e401c62-aece-42eb-aaeb-
:

On Dec 19, 8:10*pm, Lopez Gomez wrote:

I've seen Dave's collection of custom-made crystal radios and loops at
local hamfests.

Have you really? Did you get to meet him by chance? I'd really like to
try
some of his radio and regen receivers, that would be a blast.



I've known Dave for years. He and another fellow operated an electronic
parts supply store in Corning, NY. Their main customer was Corning Inc.,
but probably anyone who has worked in any electrical/electronics field in
the Elmira-Corning-Painted Post area of upstate NY has done business there,
and knows Dave.

I believe he started his crystal radio kit business as a personal hobby
about 6 years ago.