| Home |
| Search |
| Today's Posts |
|
|
|
#1
February 10th 10, 07:17 PM
posted to rec.radio.shortwave
|
|||
|
|||
Recommendations - 12 / 13.8v Power Supply, ~ 5 amp?
On 2/10/10 13:11 , bpnjensen wrote:
On Feb 10, 10:55 am, "D. Peter wrote: On 2/10/10 12:38 , bpnjensen wrote: Hi, folks - If you please, I am looking for recommendations for a PS that will provide the usual 12 or 13.8v, about 5 - 7 amps be plenty. Love to get rid of the myriad 500 ma wall-warts. I'd rather not have it be too expensive, but it would be nice if it didn't send spikes, blow up or cause hash or electrical hum. Any thoughts? There is a plethora of manufacturers and models, reviews are all over the place, I have no idea which ones are OK. Pyramid makes a 5-amp job that would be great, if it's any good. I also see Radio Shack PSs at about twice that current. Would a switching PS be better? Thanks in advance ~ Bruce Jensen A switching supply may actually become another source of hash, depending on shielding, which usually, isn't so good. There are measures to attenuate the noise, though. It takes some doing. Definitely not plug an play, if noise is a issue. I replaced my wall warts in the radio room with an Astron VS-20M. Serious power. Serious regulation. Very clean power. Nice listening. Go to MCMelectronics.com and look at some of the Tenma supplies. Cost effective, and they do what you need. There are dozens of other makes. Things to look for: Voltage range. Range of current delivery and at what voltages max current is available. Meters for both current and voltage are nice. (Volt meter more important than current meter. If you dial up the right voltage, the radios will only take the current they need. Anything beyond a modest current reserve can be dialed back for safety. Without a current meter, if you dial back the current output of the power supply below the draw, you'll see a voltage drop at the radio.) Lots of cooling vents. Heavy input cable. 30A binding posts at the output. You can even find a good power supply used on e-Bay. Thanks Peter - I had a feeling you'd have some good info on this :-) Oh yeah. I'm just full of it. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FA linear power supply with toroid power xformer | Equipment | |||
| Wtb: hp-23 power supply | Swap | |||
| WTB: HV POWER SUPPLY | Swap | |||
| Astron RS-20A Power Supply Great Condition - used to power a VHF radio | Swap | |||
| Need help w/ Power Supply | Swap | |||
Hybrid Mode
