Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Built one this morning for 10 Mhz (99 feet). Took about 15 minutes. It
works pretty well only 10' up. I'm going to put a bigger one on the roof. Very low noise. Costs nothing. (You can drive the feedpoint with a CATV balun, I'm using a 4:1 LDG balun). VSWR is about 3:1 from 7 Mhz to 15 Mhz with a little dip at 9.9 MHz (resonance). As this is a receive only antenna I didn't bother trimming for absolute minimem VSWR. I didn't test lower with the bridge, but I can get KFI (0.64 MHz) on it. I hear very little QRM on the loop. http://www.radioworks.com/nloop.html |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Looking for ideas: 2m double-stacked full-wave loop for SSB | Antenna | |||
Full-wave coaxial loop? | Antenna | |||
Full Wave Loop Question | Antenna | |||
Question about Full Wave loop | Antenna | |||
40m full wave NVIS loop - mulitband use | Antenna |