Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 5th 19, 03:56 PM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jan 2019
Posts: 4
Default how to store memories in the 909x

Hello.
I just cannot get my head around the storage part of the 909x
Could anyone help me.
I never had a radio the used pages.
I am getting nowhere fast...and I dont want to sell it as It was a present for my 76Birthday.
Plerase any help would do.

Cheeres

And thanks.

Anthony
  #2   Report Post  
Old February 5th 19, 05:23 PM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Mar 2011
Posts: 9
Default how to store memories in the 909x

Zeldo schrieb:
Hello. I just cannot get my head around the storage part of the
909x Could anyone help me. I never had a radio the used pages. I
am getting nowhere fast...and I dont want to sell it as It was a
present for my 76Birthday. Plerase any help would do.


Hi Anthony

Here

http://www.sangean.com/support/download/Manual/V1/UM_20101224_3A81TW1000000_ATS-909X_GB_V1.pdf

I found the manual for 909x as first result of an Internet search.

On pages 21 and 22 one can find how to store stations in the memory:

To Manually Set Memory on FM/MW/LW Bands:
Tune to station you would like to program into memory.
Press Memo button, MEMO will flash in the LCD display,
select page desired by pressing PAGE button. Display will flash
and next available position on display will flash if an available
position is available. If memory is full no suggested position will
flash and LCD will display MEMO FULL when any button
is depressed. Press the Enter Selection button to assign new
frequency to available flashing open position. If selected button
is held for more than 2 seconds, even with MEMO FULL flashing,
newly selected station will replace existing station.

To Manually Set Memory on SW Band:
Tune to station you would like to program into memory.
Press Memo button, MEMO will flash in the LCD display.
Select page desired by using the PAGE button and Rotary
Tuning Knob. Display will flash and next available position on
display will flash if an available position is available. Press Enter
Selection button to assign frequency to flashing available position.
If memory is full no suggested position will flash and LCD will
display MEMO FULL when any button is depressed. If selected
button is held for more than 2 seconds, even with MEMO
FULL flashing. Newly selected station will replace existing station.
You may change or initiate any page name at any time by first
selecting the page and then pressing the EDIT button and using
the Rotary Tuning Knob to place an alphanumeric character in the
name space in the LCD Display. Once a character is selected you
may move to the next position to place another character by
using the Tuning Up/Down button. When name is completely
entered press Enter Selection button.
Note:
You may change and edit your SW band’s pages names, but there
is no FM/MW/LW page name. You may change and edit your
FM/MW/LW bands’ preset names, but there is no any SW
preset name.
Note:
Every memory preset memory can be stored including
its frequency, mode (AM/LSB/USB), and fine tuning frequency.

And here is the description for recalling a station:

RECALLING A STATION IN MEMORY
On LW, press ATS/LW button, then press any of the numbered
buttons on the key pad.
On MW/FM, press ATS/MW button or press ATS/FM button,
select desired page by pressing PAGE button and then press
any of the numbered button on the key pad.
On SW, press METER/SW button, select desired page by pressing
PAGE button and rotating the Rotary Tuning Knob until desired
page is selected and then press Enter Selection button.
The receiver will then automatically search for the strongest
frequency on that page. You may change the selected frequency
using the numbered keys on the key pad.

HTH

Reinhard
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I use the memory function on my Sangean 909X Zeldo Shortwave 0 January 29th 19 06:33 PM
Sangean ATS-909x question rkhalona Shortwave 37 October 23rd 13 06:40 PM
ATS-909X Quick Review Keith[_6_] Shortwave 1 November 23rd 11 04:08 AM
Re The New Sangean ATS 909X Bob[_27_] Shortwave 9 January 8th 11 03:32 AM


All times are GMT +1. The time now is 06:47 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017