| Home |
| Search |
| Today's Posts |
|
|
|
#1
November 26th 03, 02:22 PM
|
|||
|
|||
Steve Silverwood writes:
In article , says... If the radio does not power on when you press the respective button (BTW: does setting the time work?), it's probably the infamous ribbon cable that has failed. Pre-1997 models are particularly prone to this. I'm thinking about getting one of these, but I'm curious now that you've mentioned it: how do you tell if a particular receiver is pre-1997 or not? Post-1997 models, i.e., with the ribbon cable fix, have a different hinge. The pre-1997 hinge is a continuous solid plastic tube in between the two halves of the clam shell. The post-1997 hinge has a slot about 1cm wide near the right hand end of the hinge tube, which is where the cable is routed. Also, is there a provision for loading up the memories via computer, or does it all have to be done by hand (frequencies and text labeling of presets)? Hand. -- Chris Malcolm +44 (0)131 651 3445 DoD #205 IPAB, Informatics, JCMB, King's Buildings, Edinburgh, EH9 3JZ, UK [http://www.dai.ed.ac.uk/homes/cam/] |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FCC: Broadband Power Line Systems | Policy | |||
| Wanted: Power Supply for TR-4C | Equipment | |||
| Wanted: Power Supply for TR-4C | Boatanchors | |||
| FA: $9.95 SONY AN-1 Shortwave Antenna Amplifier SW LW MW + Power Supply Item number: 5726039097 | Equipment | |||
Hybrid Mode
