Home |
Search |
Today's Posts |
#11
|
|||
|
|||
On Thu, 13 Nov 2003 16:26:06 -0800, tommyknocker
wrote: I finally got off my fat ass and decided to locate the source of the data-sounding signal blocking my HF reception. A quick tour of the premises with my DX398 revealed that the noise was only present in the computer room/ham shack (yeah, my luck). But unplugging the computer and peripherals didn't help. So I turned off the VERY EXPENSIVE surge protector that the computer plugs in to, and the noise went away. Turn the surge protector back on, and the noise starts up again. I don't want to shell out the $$$ for a new surge protector, so I'll just have to turn it off when I listen/DX. But why wasn't it doing it prior to about two months ago? Maybe I should buy another one... Part of the protection in such a device is an 'avalanche' diode, and those things are incredibly noisy if they have avalanched over. In normal operation, that shouldn't be happening, so part of your very expensive surge protector was probably broken anyway.... |
#12
|
|||
|
|||
In message , tommyknocker
writes I finally got off my fat ass and decided to locate the source of the data-sounding signal blocking my HF reception. A quick tour of the premises with my DX398 revealed that the noise was only present in the computer room/ham shack (yeah, my luck). But unplugging the computer and peripherals didn't help. So I turned off the VERY EXPENSIVE surge protector that the computer plugs in to, and the noise went away. Turn the surge protector back on, and the noise starts up again. I don't want to shell out the $$$ for a new surge protector, so I'll just have to turn it off when I listen/DX. But why wasn't it doing it prior to about two months ago? Maybe I should buy another one... Have you emptied its 'Surge Box' lately? Mike -- M.J.Powell |
#13
|
|||
|
|||
Gray Shockley wrote:
On Thu, 13 Nov 2003 18:26:06 -0600, tommyknocker wrote (in message ): I finally got off my fat ass and decided to locate the source of the data-sounding signal blocking my HF reception. A quick tour of the premises with my DX398 revealed that the noise was only present in the computer room/ham shack (yeah, my luck). But unplugging the computer and peripherals didn't help. So I turned off the VERY EXPENSIVE surge protector that the computer plugs in to, and the noise went away. Turn the surge protector back on, and the noise starts up again. Uh, you did try that with nothing plugged into the surge protector? Yep. I don't want to shell out the $$$ for a new surge protector, so I'll just have to turn it off when I listen/DX. But why wasn't it doing it prior to about two months ago? It may have taken a hit fairly recently. I had a fuse in the main box blow about two months ago when I tried to run my new electric skillet at the same time as my a/c. That's probably what did it. Maybe I should buy another one... It's lots easier to replace surge suppressors than computers. I went and bought myself a new surge protector this morning. It's a Tripp Lite (recommended by somebody else on the group) and it's one step down from the most expensive model. It was $20 and the next one up was $40. I paid $35 or so for the Belkin (the one that malfunctioned) so I think I got a good deal. |
#14
|
|||
|
|||
Gray Shockley wrote:
On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote (in message ): Stinger wrote: Our local Sam's Club has APC 1100's for $89.00. They're capable of protecting a LOT of equipment, but overkill for just one radio. I'm not a member. This particular surge protector is hooked to all my computer equipment plus a clock, a shredder and a phone. A shredder? I can't cite anyone else but I sure wouldn't hook something with a motor up to the same serge suppresser to which I have computer and phone equipment. Why? |
#15
|
|||
|
|||
tommyknocker wrote:
Gray Shockley wrote: On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote (in message ): Stinger wrote: Our local Sam's Club has APC 1100's for $89.00. They're capable of protecting a LOT of equipment, but overkill for just one radio. I'm not a member. This particular surge protector is hooked to all my computer equipment plus a clock, a shredder and a phone. A shredder? I can't cite anyone else but I sure wouldn't hook something with a motor up to the same serge suppresser to which I have computer and phone equipment. Why? Motors are inductive loads, and can create power spikes when they're turned on or off. Ever see lights dim for a second when a Vacuum cleaner was turned on? That's why. |
#16
|
|||
|
|||
In article , tommyknocker says...
Gray Shockley wrote: On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote (in message ): Stinger wrote: Our local Sam's Club has APC 1100's for $89.00. They're capable of protecting a LOT of equipment, but overkill for just one radio. I'm not a member. This particular surge protector is hooked to all my computer equipment plus a clock, a shredder and a phone. A shredder? I can't cite anyone else but I sure wouldn't hook something with a motor up to the same serge suppresser to which I have computer and phone equipment. Why? Motors can take extra current to start up....that can feed into anything else plugged into the same circuit. I used to work as a computer network consultant. A client kept blowing out one of their hubs. I traced it to a electric pencil sharpener plugged into the same wall plug as the hub. Everytime someone sharpened their pencil, a surge of current was also placed on the hubs circuit. They had blown out 3 hubs in a month. We just moved the sharpener to another location and the prob stopped. elfa |
#17
|
|||
|
|||
The reason I prefer a true Uninterruptable Power Supply (UPS) instead of a
surge protector is that I've seen my UPS switch over to metered battery power up to two seconds before I see a flash of lightning (or hear close thunder). I would think that this "switching over," effectively cutting out the overloaded circuit, is a much better method of protection than trying to dampen a big lightning (or other) surge as the surge protectors do. -- Stinger "elfa" wrote in message ... In article , tommyknocker says... Gray Shockley wrote: On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote (in message ): Stinger wrote: Our local Sam's Club has APC 1100's for $89.00. They're capable of protecting a LOT of equipment, but overkill for just one radio. I'm not a member. This particular surge protector is hooked to all my computer equipment plus a clock, a shredder and a phone. A shredder? I can't cite anyone else but I sure wouldn't hook something with a motor up to the same serge suppresser to which I have computer and phone equipment. Why? Motors can take extra current to start up....that can feed into anything else plugged into the same circuit. I used to work as a computer network consultant. A client kept blowing out one of their hubs. I traced it to a electric pencil sharpener plugged into the same wall plug as the hub. Everytime someone sharpened their pencil, a surge of current was also placed on the hubs circuit. They had blown out 3 hubs in a month. We just moved the sharpener to another location and the prob stopped. elfa |
#18
|
|||
|
|||
On Fri, 14 Nov 2003 19:19:37 -0600, Stinger wrote
(in message ): The reason I prefer a true Uninterruptable Power Supply (UPS) instead of a surge protector is that I've seen my UPS switch over to metered battery power up to two seconds before I see a flash of lightning (or hear close thunder). By strict definitions, that's not an UPS but a SPS (Standby Power Supply) because it - as you say - "switches over". In an UPS, (Uninterruptable Power Supply) all power is through the battery all the time; there's no lag because there can't be one grin. I've got an old APC 600-watter that's a "legit" UPS but it's the old style that has to be sent back for a new battery sigh. So we're using a couple of SPS's until my ship (or a stern-wheeler - whatever) comes in. I would think that this "switching over," effectively cutting out the overloaded circuit, is a much better method of protection than trying to dampen a big lightning (or other) surge as the surge protectors do. Gray Shockley ----------------------- DX-392 DX-398 RX-320 DX-399 CCradio w/RS Loop Torus Tuner (3-13 MHz) Select-A-Tenna ----------------------- Vicksburg, MS US |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Noise Figure Measurements | Homebrew | |||
Need a low noise VXO for narrow sweep | Homebrew | |||
WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter | Homebrew | |||
Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE | Shortwave |