Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
HIDALGO,
Many modern electronics devices have "Always-On" or "Standby" Circuits; that when the Power Switch is Turned OFF are still in-fact ON. The only way to really Check them in a Totally OFF State is to Un-Plug Them from the AC Power; Remove the Back-Up Batteries; and Disconnect any Input and Output Cables[.] jm2cw ~ RHF .. .. = = = "Hidalgo" wrote in message = = = news:Dn8yc.30447$My6.27367@fed1read05... Brian, Thanks! From the examples here on this site, I'd say it's probably some of the computer equipment around the apartment. I turn the monitor off and power off the computer, but my cable modem stays on always. And even though the monitor is turned off, it's still connected to the power cord and may very well be generating RFI. I'll experiement with actually unpluging some of it and find out. Thanks again! "Brian" wrote in message nk.net... This may prove helpful: http://www.ve3hls.com/noise/rfihome.html Brian |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
NTIA Claims BPL Could Help Alleviate Power Line Noise | Shortwave | |||
Amateur Radio Newsline(tm) Report 1394 - April 30, 2004 | Shortwave | |||
Amateur Radio Newsline(tm) Report 1394 - April 30, 2004 | CB | |||
Complex line Z0: A numerical example | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna |