Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I am in need of some assistance... My trusty Lowe HF-225 appears to have
gone bonkers. It appears to be no longer receiving anything outside of the normal US AM broadcast band with either a longwire antenna connected to the 600-ohm lead or with a loaded antenna on the 50-ohm connector. I do not have the W-225 option installed. Either antenna connected runs the S-meter up to about 3-4 but no signals are received on known frequencies above 1.7 MHz (e.g. WWV on 10 MHz) - and the radio does know that there's an antenna attached, as the S-meter drops to zero with nothing attached. Occuring more-or-less simultaneously with this problem has been two occasions when I have turned on the radio and the display has shown "flt". Turning the radio off and back on returns it to normal tuning - but still no signals received other than below 1.7 MHz. I do not have a service manual for this radio, nor do I really have the ability to diagnose and repair it properly if I did. This radio has served me well since I purchased it and this is the first major problem I've had. Unfortunately, a little research on the web indicates that Lowe UK won't do business with us in the States, and shops such as RadioLabs who have serviced Lowe radios in the past no longer do so... so I'm hoping that one of you out there who has a Lowe radio might know someone capable of diagnosing and repairing it. I'm willing to ship it just about anywhere to get it repaired - obviously, I'd prefer the US, but will definitely consider shipping it outside the US should that be necessary. Thanks in advance for any help! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FCC: Broadband Power Line Systems | Policy | |||
a great read | CB | |||
Broadcast Station Field Strengths.. | Antenna | |||
Lowe HF150 service manual | Shortwave | |||
Lowe HF225 service manual, free! | Shortwave |