Terry:

The band change switch is on the loop. The knob on the front of the unit has
MW freq's listed on one side, and LW freq's listed on the other, 180 degrees
apart. The LW runs from just below 150 Khz to just over 300 Khz. The MW
seems to tune all the way down to 510, and up to about 1630.

--Guy


On 8/4/05 2:42 PM, in article
,
" wrote:

Thanks.
Is the band change switch on the loop or
on the tuning unit. If it is on the loop then
they are adding more turns, if it is on the
tuner, then they are adding more capacitance.

I don't know if you have ever had the loop open,
but it has very few turns. Much less then one
would expect on a MW feritte rod antenna.

Terry