In my SX-115, putting the selectivity switch to the widest position (5KHz):

- I see a two S-units drop in the S-meter reading
- selectivity is actually narrower than in the 3 kHz position.

I wonder whether SX-115 owners have same or similar experience.

Looking at the schematic diagram, there are five switch wafers that determine
selectivity, two of which switch capacitors and three switch resistors. I have
determined that the switch works fine, so I am wondering whether the problem
could be due to a mistuning of the 50 kHz IF coils.

Thanks for any advice.

73

Tony I0JX
Rome, Italy