Service Monitor Calibration Question

August 23rd 03, 12:19 AM

KLØS

Posts: n/a

Some service monitors will accept an external frequency reference, usually
10 MHz....my IFR 1500 has a port on the back that accepts a 10 MHz
signal....I use a pair of HP Z3801A GPS frequency references to drive the
IFR and several other pieces of test gear on the bench.

Dino KLØS/4

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ham-radio is a hobby not a service	Dave	Policy	386	April 5th 04 11:59 PM
Why You Don't Like The ARRL	Louis C. LeVine	Policy	803	January 23rd 04 01:12 AM
Broadcast Station Field Strengths..	Reg Edwards	Antenna	3	December 29th 03 02:54 AM
Low reenlistment rate	charlesb	Policy	54	September 18th 03 01:57 PM
Some comments on the NCVEC petition	D. Stussy	Policy	13	August 5th 03 04:23 AM

All times are GMT +1. The time now is 09:12 AM.

Menu

About Us