Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
alinco dr1200t which mic to use?
i hace an alinco dr1200t data radio
which mic is used with this rig? thanks jack |
#2
|
|||
|
|||
You can use any Alinco or Kenwood microphone with that 8-pin connector.
The DR-1200T was identical to the DR-110T except it was sold without a microphone, the intent being to use it for digital modes. 73, Bob |
#3
|
|||
|
|||
On Wed, 22 Oct 2003 03:01:43 GMT, "
wrote: i hace an alinco dr1200t data radio which mic is used with this rig? thanks jack Danger! Danger! One of the pins is direct discriminator output and another (as I recall) is input direct to the varactor. The radio can be fried right from the microphone connector and I know someone who did just that trying to use a normal microphone. It would be safer to get a manual/schematic and make sure nothing gets connected to the discriminator and varactor. If you never intend to use it for packet it is worth disconnecting the varactor/discriminator pins from the microphone connector just to be sure. Followups to rec.radio.amateur.equipment 73, Jim N2VX |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Some final questions on Alinco DJ-X2000 before purchasing | Scanner | |||
alinco DX-70t transmitter problem | Equipment | |||
FA: Alinco DR-135T VHF FM Mobile Transceiver, NR: EBay | Equipment | |||
WTT: Yaesu FT-8900 for Alinco mono banders | Swap | |||
FS: Alinco 605TQ | Swap |