| Home |
| Search |
| Today's Posts |
|
|
|
#1
November 14th 03, 01:59 PM
|
|||
|
|||
Jon;
The Model 240 is a fan cooled "dry" dummy load. It requires a 12 vdc source to power the fan. Typical is a cable with RCA jacks from the transceiver to the DL. Have seen them from $125. & up. Very rare accessory. Mine is switched inline when tuning the Titan amp. Good luck de Jim, K4SQR Jon Kummer wrote in message ... Hi - Does anyone have any information on the Ten Tec 240-KW dummy load. I'm thinking of buying one and looking for it's value. Thanks. Jon |
|
#2
November 14th 03, 02:55 PM
|
|||
|
|||
|
Thank you for the information.
Jim wrote: Jon; The Model 240 is a fan cooled "dry" dummy load. It requires a 12 vdc source to power the fan. Typical is a cable with RCA jacks from the transceiver to the DL. Have seen them from $125. & up. Very rare accessory. Mine is switched inline when tuning the Titan amp. Good luck de Jim, K4SQR Jon Kummer wrote in message ... Hi - Does anyone have any information on the Ten Tec 240-KW dummy load. I'm thinking of buying one and looking for it's value. Thanks. Jon |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FA: BIRD MODEL 8890 TERMALINE 2.5 KW DUMMY LOAD | Equipment | |||
| bird dummy load construction.. | Homebrew | |||
| FS: Dummy Load & HT Test Set | Equipment | |||
| FS: Dummy Load & HT Test Set | Equipment | |||
| FS: Dummy Load & HT Testset | Boatanchors | |||
Hybrid Mode
