Home |
Search |
Today's Posts |
#1
|
|||
|
|||
FS: TE SYSTEMS 2252RA Repeater Amp
Bought this unit thinking I would make into linear service for SSB ( too
much work for time available), up to 25w input = 200w + watts output, 13.6 vdc power, dual cooling fans on large heat-sink for CCS use, 5" rack mount, uses 1 x MRF648 to drive 4 x MRF648 (rated 60w each), works fb on 222.1 mhz CW, 223.5 FM, would require T-R relay system for non-repeater use. Owner can remove amp from rack mount and use table top or /Rover. Can adjust drive power for 'required' output power obviously. Cost new is $750. Want $375. shipped from WNY. See QST-CQ for TE SYS. ads. |
#2
|
|||
|
|||
I have interested party
Anything changes will re-post. thanks AL "AL G." wrote in message ... Bought this unit thinking I would make into linear service for SSB ( too much work for time available), up to 25w input = 200w + watts output, 13.6 vdc power, dual cooling fans on large heat-sink for CCS use, 5" rack mount, uses 1 x MRF648 to drive 4 x MRF648 (rated 60w each), works fb on 222.1 mhz CW, 223.5 FM, would require T-R relay system for non-repeater use. Owner can remove amp from rack mount and use table top or /Rover. Can adjust drive power for 'required' output power obviously. Cost new is $750. Want $375. shipped from WNY. See QST-CQ for TE SYS. ads. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FCC: Broadband Power Line Systems | Policy | |||
HELP: 2 meter repeater intermod problem from pager transmitters | General | |||
HELP: 2 Meter Repearter intermod from 2 Pager transmitters near repeater site | Equipment | |||
HELP: 2 Meter Repearter intermod from 2 Pager transmitters near repeater site | Equipment | |||
CW Testing Question | Policy |