Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 25th 06, 08:49 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 797
Default Barium Titanate powder problems


"Cecil Moore" wrote in message
. ..
Dave wrote:
just what are you trying to do?? there are all sorts of binding agents
you could use depending on the requirements, just about any glue could be
used, but they have different mechanical and chemical properties.
probably the most durable would be an epoxy, but there are also castable
plastic resins like the ones used for hobbyist to make paperweights, all
the way down to simple casein based glues.


Is there a superstrong glue that remains flexible after
hardening? Something with a little give to it?


depends on what you are trying to glue. plain old rubber cement when used
properly has those properties.


  #2   Report Post  
Old December 25th 06, 08:49 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 1,614
Default Barium Titanate powder problems

Dave wrote:
depends on what you are trying to glue. plain old rubber cement when used
properly has those properties.


You just reminded me of the stuff I once used on
my wet suit in CA - thanks.
--
73, Cecil http://www.w5dxp.com
  #3   Report Post  
Old December 26th 06, 05:52 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Nov 2006
Posts: 2,915
Default Barium Titanate powder problems

Cecil Moore wrote:
Dave wrote:
depends on what you are trying to glue. plain old rubber cement when
used properly has those properties.


You just reminded me of the stuff I once used on
my wet suit in CA - thanks.


How about the clear silicone stuff they use to cement aquariums with?
Should be able to pick up a tube of it in any large pet supply ...

Regards,
JS
  #4   Report Post  
Old December 26th 06, 03:56 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 33
Default Barium Titanate powder problems

On Mon, 25 Dec 2006 20:49:47 -0000, "Dave" wrote:


"Cecil Moore" wrote in message
...
Dave wrote:
just what are you trying to do?? there are all sorts of binding agents
you could use depending on the requirements, just about any glue could be
used, but they have different mechanical and chemical properties.
probably the most durable would be an epoxy, but there are also castable
plastic resins like the ones used for hobbyist to make paperweights, all
the way down to simple casein based glues.


Is there a superstrong glue that remains flexible after
hardening? Something with a little give to it?


depends on what you are trying to glue. plain old rubber cement when used
properly has those properties.


So does good lold Silastic RTV (TM)


Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
www.rogerhalstead.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with ARRL Incoming buro? Dave WB4IUY Dx 12 December 1st 06 08:48 AM
OT - TELEPHONE PROBLEMS Keith Hosman KC8TCQ CB 0 June 30th 04 11:36 PM
Sangean Problems? DeWayne Shortwave 11 March 10th 04 10:36 PM
Iron powder vs. ferrite cores for low-power inductors Jason Hsu Homebrew 6 September 23rd 03 02:24 AM
Iron powder vs. ferrite cores for low-power inductors Jason Hsu Homebrew 0 September 22nd 03 08:30 PM


All times are GMT +1. The time now is 03:08 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017