Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() Hmm, an interesting approach! But its all about trying things! I'll give that one a go too. It doesn't take long to wind & try! Adrian. Here's what I would try as a wild hair experiment. Wind the electrical 1/2WL helix and find the frequency at which the impedance is purely resistive and maximum. A GDO should accomplish that. That's the resonant frequency for an end-fed 1/2WL monopole. Use some spacing and wind the remainder of the coil opposite to the original, i.e. CW Vs CCW. This would theoretically put the fields in phase on each side of that current node. It sounds very tricky and I have never heard of it being done before, but it might work. And of course, this would work perfectly on only a single frequency. Off to each side of that frequency, the problem would again manifest itself. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
mobile antenna impedance comparison | Antenna | |||
"Homebrew FM tap" for the mobile ? | Antenna | |||
Mobile Antennas | Antenna | |||
Need HF / Mobile Antenna Recommendation | Antenna | |||
Wanted: SWAN Mobile Antenna Info | Antenna |