Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
In article ,
"John Doe" wrote: I am LQQking for a Hustler 160m mobile coil and whip. Howard- I don't think there is a 160 Meter Hustler resonator currently available. I don't know if they ever made one, or made a single-band 160 Meter mobile antenna. I have a 160 Meter mobile antenna purchased several years ago from AES. As I recall, it was NOT made by Hustler. I can't find any markings on it that might tell who made it. It is in a similar configuration to the Hustler with a resonator, except using a much shorter mast below the coil. I suspect it would hit highway overpasses if the coil and top parts were used on a Hustler mast! Fred K4DII |
#2
![]() |
|||
|
|||
![]()
Fred McKenzie wrote:
Howard wrote: I am LQQking for a Hustler 160m mobile coil and whip. Howard- I don't think there is a 160 Meter Hustler resonator currently available. I don't know if they ever made one, or made a single-band 160 Meter mobile antenna. I have a 160 Meter mobile antenna purchased several years ago from AES. As I recall, it was NOT made by Hustler. I can't find any markings on it that might tell who made it. It is in a similar configuration to the Hustler with a resonator, except using a much shorter mast below the coil. I suspect it would hit highway overpasses if the coil and top parts were used on a Hustler mast! Fred K4DII Hustler/Newtronics (http://www.new-tronics.com/) never made a resonator for 160m (I used to sell Hustler at the local ham radio emporium). That said, there's no reason you can't modify the parts you *can* get and/or use an ATU with it. I've done just that with 80-10m parts & pieces. The whips are 0.1" diameter, and Larsen sells 49" and 64" tapered whips that are the same diameter at the bottom... 75m = 64" whip + reduce inductance on RM75 40m = 49" whip + reduce inductance on RM40 20m = 49" whip shortened to ~40" + RM15 I haven't yet tried anything special for 15m, but expect an RM10 or RM12 + longer whip will work. 10m = 49" whip + homebrew 3/8"-24 fem/1/4"-28 male adapter + ferrule & locknut (no loading coil) Vy 73, Bryan WA7PRC |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
LQQking for AMP | CB | |||
LQQKing For Some Info | Antenna | |||
LQQKING FOR SOME INFO | Equipment | |||
LQQKING: JB-12 MODULATOR | Swap | |||
LQQKing for article | Antenna |