Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
I have up a half size G5RV and want to add 80 metres it. I don't have the
space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks |
#2
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
"Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. |
#3
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
In message rEsFj.101$sR1.28@trndny08, Dave writes
"Barrett" wrote in message . uk... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. Do a Google search on 'G5RV+extend'. There seems to be a lot of information available. -- Ian |
#4
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
Dave, I have just put a Cowebb for 20 through to 10m. Its just 80 and 40 I'm
interested for the time being. Is it hard to make a pair of inductors and how would I go about making a pair? Thanks "Dave" wrote in message news:rEsFj.101$sR1.28@trndny08... "Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. |
#5
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
"making" them is easy, just wind some wire around some kind of form, like a
piece of pvc pipe. figuring out how much wire, how many turns, and the diameter is the hard part. I would use one of the antenna modeling programs to figure that out given your current design and picking a point where you think you can insert them. from that you could get a value of inductance needed, then pick a likely form size and use one of the inductance calculators on line to figure out how many turns of wire it would take. "Barrett" wrote in message ... Dave, I have just put a Cowebb for 20 through to 10m. Its just 80 and 40 I'm interested for the time being. Is it hard to make a pair of inductors and how would I go about making a pair? Thanks "Dave" wrote in message news:rEsFj.101$sR1.28@trndny08... "Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. |
#6
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
"Is it hard to make a pair of inductors and how would I go about
making a pair?" It's a coil. So, make a couple of coils of wire, typically on a form of some kind cuz just wire tends to unravel if not held together some way. That form ought to be non-conductive, PVC pipe for instance. 'Fatter' coils tend to be shorter than 'skinny' coils, and more efficient sort of (to some ridiculous point), take up less room. How long/diameter? Beats me. Make them what you think is too big and then try shorting out turns of each coil till you get to where you wanna go. That'll work for one band, probably not too well for two bands, ain't gonna work for all bands at one time unless you make those coils adjustable (coil taps). Expect compromises. Won't be the 'best' in the world, but it'll work. - 'Doc |
#7
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
I will have a look for a antenna modelling program that I can get on with.
Also I'm using pvc covered flexweave wire for my G5RV. Is it all right to make the inductors up from flexweave or should I get some enamelled copper wire, or doesn't it really matters? Thanks "Dave" wrote in message news:J1tFj.1921$7y3.986@trndny02... "making" them is easy, just wind some wire around some kind of form, like a piece of pvc pipe. figuring out how much wire, how many turns, and the diameter is the hard part. I would use one of the antenna modeling programs to figure that out given your current design and picking a point where you think you can insert them. from that you could get a value of inductance needed, then pick a likely form size and use one of the inductance calculators on line to figure out how many turns of wire it would take. "Barrett" wrote in message ... Dave, I have just put a Cowebb for 20 through to 10m. Its just 80 and 40 I'm interested for the time being. Is it hard to make a pair of inductors and how would I go about making a pair? Thanks "Dave" wrote in message news:rEsFj.101$sR1.28@trndny08... "Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. |
#8
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
whatever you can wind with. solid copper will stay in place better by
itself being a bit springy, flexweave you would probably have to glue down to the form to keep it from sliding around. "Barrett" wrote in message ... I will have a look for a antenna modelling program that I can get on with. Also I'm using pvc covered flexweave wire for my G5RV. Is it all right to make the inductors up from flexweave or should I get some enamelled copper wire, or doesn't it really matters? Thanks "Dave" wrote in message news:J1tFj.1921$7y3.986@trndny02... "making" them is easy, just wind some wire around some kind of form, like a piece of pvc pipe. figuring out how much wire, how many turns, and the diameter is the hard part. I would use one of the antenna modeling programs to figure that out given your current design and picking a point where you think you can insert them. from that you could get a value of inductance needed, then pick a likely form size and use one of the inductance calculators on line to figure out how many turns of wire it would take. "Barrett" wrote in message ... Dave, I have just put a Cowebb for 20 through to 10m. Its just 80 and 40 I'm interested for the time being. Is it hard to make a pair of inductors and how would I go about making a pair? Thanks "Dave" wrote in message news:rEsFj.101$sR1.28@trndny08... "Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks well, 'traps' are usually used to cut off an antenna that is too long for the band in question, so that is probably not what you want. simple inductors are used to make an antenna look longer so that is what you would want... but expect it to affect tuning on all bands, not just add 80m capability. |
#9
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
"Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks If you add inductors to a G5RV, it will no longer be a G5RV. You might be better off with an 80 - 10 m trap dipole. It will be shortert than an 80 meter dipole. Tam/WB2TT |
#10
|
|||
|
|||
80m inductor kit or a pair of 80m traps?
I found a good site on how to make some air spaced coaxial traps for each
band but that's all I could find. Can traps be made up with enamelled copper wire as I have just ordered a real of 20 swg? I've found some good information on inductors but is there any good sites on making traps with copper wire? Thanks "Tam" wrote in message ... "Barrett" wrote in message k... I have up a half size G5RV and want to add 80 metres it. I don't have the space for a full size. What is best to go for a 80m inductor kit or a pair of 80m traps? Thanks If you add inductors to a G5RV, it will no longer be a G5RV. You might be better off with an 80 - 10 m trap dipole. It will be shortert than an 80 meter dipole. Tam/WB2TT |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS:Crushcraft traps for a A-4 | Antenna | |||
FA: Pair of NOS Amperex 3B28's, Pair or RCA 807's, 866A & 5R4GTY | Boatanchors | |||
FA: Pair of NOS Amperex 3B28's, Pair or RCA 807's, 866A & 5R4GTY | Equipment | |||
Capacitor Traps | Shortwave | |||
WTB : Beam Traps | Equipment |