Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
On Thu, 31 Mar 2011 18:46:22 -0500, tom wrote:
http://www.arrowantenna.info/osj/j-pole.html This design works moderately well. Drive the 19.25 inch element. The 51 inch element is the radiator on 2m, the 6.xx inch element makes the 19.25 inch one radiate on 440. The thing isn't great on 440 because the 51 inch portion is there. It is rugged though. I built a duplicate, which you can do if you look at all the parts pages on the site. The main problem, same as all J poles, is common mode current issues on the feedline. tom K0TAR Sorry, missed the part where you already have this antenna. My fault for not reading the whole post until after I responded. Hi Tom, Your suggestion would have been my choice too - except for Tom's first purchase choice. The open stub has always seemed to be a more natural feed method. The addition of the parasitic radiator is still an option for any design. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antenna advice? | Homebrew | |||
Need HF Antenna advice | Antenna | |||
Need AM antenna advice | Antenna | |||
AEA CIA/VIA antenna analyzer modification help please | Antenna | |||
Modification to antenna ? | Antenna |