Home |
Search |
Today's Posts |
#3
|
|||
|
|||
LDG Z11 Pro II tuner with an Icom IC-761
On Wed, 28 Sep 2011 09:26:36 -0700, Jeff Liebermann
wrote: On Wed, 28 Sep 2011 10:46:44 -0500, Jeffrey Angus wrote: Recently acquired an LDG tuner. Nice part. I'm looking forward to the not having to twist knobs every time I change frequency. Ok, you're lazy. It comes with an adapter cable for Icom radios, but it's a 4-pin Molex connector and the manual doesn't show what the connections/signals are for the radio. Anyone out there connect this tuner to an IC-761 already? Buy or clone the LDG Icom interface cable. The IC-761 supports the Icom AH-4 antenna tuna, so it should work: http://www.ldgelectronics.com/c/252/products/13/23/1 The warrany on this advice expires after you read this message. Schematic: http://www.ldgelectronics.com/assets/images/products/cables/IC%20cable.jpg Alternate source: http://www.cheapham.com/products/LDG-IC%252dPAC%252d6-Icom-Interface-Cable-%252d-6-Foot.html Hmmm... why do you need an antenna tuner? Can't you build an antenna that's close to 50 ohms? Or, are you like me and just hang any random length of wire in the trees and hope for the best? -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: Icom ah-4 Tuner | Swap | |||
ICOM 738 - AH3 Tuner | Boatanchors | |||
FS: Icom AT-180 Auto Tuner | Swap | |||
FS: Icom AT-180 Auto Tuner | Swap | |||
WTB: Icom AT-150 antenna tuner | Swap |