Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Szczepan Bialek wrote:
"The current which flows on the outer surface of the shield is called common mode current. In other words, it is the unbalanced current not returned within the coaxial cable. This leads to a very important question. If the current isn't returned in the cable, where does it go? The answer is, it radiates! In fact, the amount of radiation from the coax cable is directly proportional to the common-mode current on that cable." From: http://www.k0bg.com/common.html "In fact, the amount of radiation from the coax cable is directly proportional to the common-mode current on that cable." The currents consists of electrons. Does it means that the electrons jump off from the end of the radiator? No, it does not mean that. There are no jumping electrons involved in radiation and you are an ineducable idiot. In Faraday time no such meters but Faraday had know that electrons (nuclei) jump off from the end of the open circuit. No, Faraday did NOT know that as it doesn't happen that way and you are an ineducable idiot. Also L. Lorenz known that the light is the oscillatory flow of electrons. No, Lorenz did NOT know that as it doesn't happen that way and you are an ineducable idiot. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Common Mode Choke ? | Antenna | |||
Common Mode chokes | Antenna | |||
Using Oscilloscope to Detect Common Mode Current | Antenna | |||
4:1 Current Balun Common Mode Impedance? | Antenna | |||
Common-Mode Noise . . . | Shortwave |