Go to the jamesmillenco.com web site and scroll halfway down page 1 for a
photo of the coils in the rack. A further Google search will reveal many
other pages with photos. The 60 - 150 coil is two turns of #20 wire 3/8"
dia., and spaced about 1/8" apart out at the end of the plastic tube (inside
it).

--
Crazy George
Remove N O and S P A M imbedded in return address
"Jerry Martes" wrote in message
...
I want to make a coil for a Millen grid dip meter that I bought
*without*
coils. It would be alot easier if I had a picture of the coil Milen uses
for the 60 to 150 MHz range. Is there anyone who'd be willing to send me
a
picture of that coil?

Thanks
Jerry