| Home |
| Search |
| Today's Posts |
|
#10
|
|||
|
|||
|
"R. Scott" wrote in message ... On 1/28/2014 1:25 AM, wrote: The vehicle is a 2011 F-350 and I have the Fender Mount CB. Like I said I use it only for the RV runs. Thus I would like to experiment with one of the whips to run a 2 meter. I could have easily did a 1/4 wave vertical but thought that 5/8 would be better experiment. the loaded 5/8 ungrounded as NM5K posted just might be what I need. I was looking for how many turns of wire might do the trick. Problem is I dont have a GDO to get the right turns so thats why I was hoping to find someone whom ad done it before .I saw an antenna similar to what you are wanting to do. I think it was 47 inches long. The coil will only be a few turns. I don't recall the number of turns on the form for that antenna, but it was only about 2 or 3 turns. I would start with 3 turns and check the swr and trim the turns for a low swr. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS; 10 METER MOBILE AMP | CB | |||
| WTB: Mic for ADI AR-147 2 meter mobile | Swap | |||
| FS: 10 meter mobile amp | Swap | |||
| Astron PS, Icom mobile 2 meter radio, Kenwood SWR/power meter and MFJ DC outlet | Swap | |||
| f.s. htx-100 10 meter mobile | Swap | |||