Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Connecting multiple filters to multiband antenna
On 3/19/2015 12:41 PM, Jeff wrote:
I have been keeping up with the thread, Jeff. And he was asking about using his diplexers. It was others who though adding filters would be helpful. I have never suggested this setup. You obviously have not, because this is what the OP asked: "Can I anticipate any ill affect from placing a coaxial Tee fitting across the output of one filter and connecting a jumper to the output of another filter in order to connect the transceivers to the multiband antenna? Would there be any additional concerns be raised if one of the two filters was the dual band model with separate connections for each of it's two bands on the end being used for input connections? What about if I make up the assembly using Three separate filters with Two of them connected to TEE fittings" That specifically asks about filters not diplexers. Jeff In this case the "filter" he is referring to is one section of the diplexer. Not necessarily the most technical description - but also not inaccurate. -- ================== Remove the "x" from my email address Jerry, AI0K ================== |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Recomend Size of Aux Antenna for use with MFJ-1025/6 or ANC-4 | Antenna | |||
Flower Pot Antenna a Dual-Band (20m and 10m) 'portable' Antenna | Shortwave | |||
Inquiry: dual band hand held radios | Swap | |||
dual band radios that transmit frs channels | General | |||
dual band radios that transmit frs channels | Policy |