Home |
Search |
Today's Posts |
#6
|
|||
|
|||
MC50 wiring
BillyBobMarley wrote:
On Sunday, November 22, 2015 at 12:10:42 AM UTC-5, Irv Finkleman wrote: BillyBobMarley wrote: I know this really isn't the appropriate newsgroup but I was wondering if any of you good people have the wiring scheme for a Kenwood MC 50 to a Kenwood TS 520se transceiver ? Thanks in advance. You can plug the MC50 plug directly into the TS-520 mic jack -- they are practically made for each other. I ran the combo for quite a while way back when. No wiring changes are required. Irv VE6BP I bought the mic off a guy at a club meet and it had a 6 pin plug on it hence the rewiring inquiry . Thanks all for the help , hope to see ya'll further down the log when I attempt to install a 40 meter extended double zepp in my modest back yard in the springtime. Ooops! Didn't consider the situation and that it had been modified. If you send me your email address, or if the whax44 is valid and let me know. I have the Kendood MC-50 Instruction Sheet and I'll send it to you. I'll try the whax44 address as soon as I've sent this off. I've spent the last 18 months trying to get a signal off of my balcony (I'm in a Senior's Residence with the rule that nothing can hang over the railing that I cannot take in when I'm not operating). That wouldn't be so bad except that my balcony forms the only open side of what is all metallic surround i.e. am trying to get something that will radiate from what is essentially a Faraday cage!! @#$@! My motto in life is 'RADIATE OR DIE TRYING!' Irv VE6BP |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Disassembly Help needed, MC50 Mic | Equipment | |||
Disassembly Help needed, MC50 Mic | Equipment | |||
Disassembly Help needed, MC50 Mic | Equipment | |||
ADI at-200 wiring... | Digital | |||
FA KENWOOD MC50 DESK MIKE COLLECTOR QUALITY | Swap |