Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
Sounds like some stuff I once looked at. That was either RG17 or RG117.
Connectors are going to be very expensive. Unless you can determine that it is very low loss, and really want it, buying new 9913 or LMR400 + connectors might be cheaper. Andrew connectors in that size range are about U$ 30 each. Tam/WB2TT "MikeN" wrote in message ... I have a 30 metre length of large diameter coax which I need to identity to ensure I get the correct connectors. The cable is about twice as thick as RG213, and has the following parameters. Sheath is 22mm OD black PVC. or PE Inner conductor is a single solid 5 mm dia copper conductor Outer conductor is bare copper braid. Dielectric is solid polyethylene I think this coax is UR 74 or perhaps UR 74M (is there a difference?). Could someone confirm my identifcation or put me right if I'm in error. Thanks MikeN ZL1BNB |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Ladder Line or Coax For Reception only? | Antenna | |||
Parallel runs of coax to antenna | Antenna | |||
Coax air choke for 6M yagi | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna | |||
Feeding two Yagi's from One Coax. | Antenna |