Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Reg Edwards wrote:
Cec, I'm not altogether happy about the current coming to a sudden stop at the ends of a dipole. It doesn't come to a sudden stop, Reg. It is reflected out of phase such that the forward current vectorially added to the reflected current equals zero, i.e. the net current is zero at the ends of the antenna. If appreciable current flowed through the air, it would first have to ionize the air causing an arc. The reflected current from the ends of the dipole is what gives that standing- wave dipole its low feedpoint impedance. If it weren't for the reflected current from the ends of the dipole, the feedpoint impedance would be in the hundreds of ohms and it would be a traveling-wave antenna. What's that stuff which clearly flows between the plates of a wide-spaced capacitor? If current is clearly flowing between the plates, it is called an arc. Appreciable current doesn't usually flow across the air gap between the plates. Current flows in the rest of the circuit while charges are stored on the capacitor plates. Current flowing directly between the plates means that the air has been ionized and the cap is breaking down. I have one of those in the horizontal drive section of my TV. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Pls comment on this dipole | Antenna | |||
shortened dipole loaded | Antenna | |||
10m dipole and tuner | Antenna | |||
Comet VA30 (base loaded tri-band dipole 40/15/10) | Antenna | |||
Dipole connected to grounded receiver? | Antenna |