| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
|
wrote in message ps.com... I just bought one that measures forward and reflected power and at the bottom is the swr calculation. Is the antenna's swr where the two needles meet? yes, look behind where the needles cross and there should be a set of lines calibrated in swr. Also the switch on it for 2 meters says "144 mhz" So I should tune my radio to this when tuning? What if I want my antenna tuned for 146 mhz. no, you set your radio for whatever frequency you want to operate on and check the swr there. they label it 144mhz just to say what band it can handle. It is an MFJ unit. Yes I did read the instructions but they left alot to be desired for a first timer. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| How to work satelites? | General | |||
| Best Home Base Work | Policy | |||
| Here it is-BPL full rollout in Va | Policy | |||
| R/S Solderless BNC Connectors: How Can They Possibly Work Well ? | Antenna | |||
| Geller Media | Broadcasting | |||