LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old March 4th 05, 06:45 AM
John Woodgate
 
Posts: n/a
Default

I read in sci.electronics.design that Tom Ring
wrote (in ) about '1/4 vs
1/2 wavelength antenna', on Thu, 3 Mar 2005:

He forgot to mention that for that output impedance to be relevant, you
need superconducting wire to the speakers as well as superconducting
voice coils.


See the last sentence, about the effect of an **8 ohm** source impedance
on damping.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discone antenna plans [email protected] Antenna 13 January 14th 05 11:51 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM
X-terminator antenna (Scott Unit 69) CB 77 October 29th 03 01:52 AM
Outdoor Antenna and lack of intermod Soliloquy Scanner 11 October 11th 03 01:36 AM


All times are GMT +1. The time now is 11:30 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017