AR-40 controller box problem

March 20th 05, 10:10 PM

ps_dude

Posts: n/a

Bad limit switch inside the rotor.

" wrote:

Hi Group,

I have a problem with my CDE AR-40 rotor controller box. The
controller will drive the rotor into the limit without stopping. I can
swap connections 4 and 5 and it goes into the limit in the other
direction.

I brought the rotor down and checked it on the bench to verify that it
was not a cable problem. I also checked it on another rotor with same.

Any one help with a schematic or has seen and fixed this problem
before?

de KJ4UO

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaesu G-450XL Controller box	KA3OYW	Antenna	0	February 10th 05 08:11 PM
HELP: 2 meter repeater intermod problem from pager transmitters	Photoman	General	5	December 26th 04 08:27 PM
OT EMI problem with stove and internet connection	default	Homebrew	4	December 25th 04 10:13 PM
Schematic jpeg for Yaesu G-5500 Controller needed	Calvin	Equipment	0	January 24th 04 09:16 PM
Schematic jpeg for Yaesu G-5500 Controller needed	Calvin	Equipment	0	January 24th 04 09:16 PM

All times are GMT +1. The time now is 01:56 AM.

Menu

About Us