Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Anti-oxidant grease question
"John Popelish" wrote in message ... Joe S. wrote: John: THANK YOU!!! Exactly what I needed -- I don't know how you found that -- I spent an hour searching with Google for various combinations of anti-oxidant, antioxidant, applying, application, etc., etc. It took a few tries, including adding the words [aluminum copper electrical] to reduce the diet pill adds. I'll pick up a tube/can/jug/whatever of Penetrox tomorrow at my local electrical supply house, disassemble both antenna mounts and connectors, "abrade" them thoroughly, and slap the Penetrox onto every metal-to-metal junction. For aluminum, (which oxidizes almost instantly in contact with air) they recommend coating the surface and then doing the final abrading, so the fresh surface has no contact, at all, with air, before the joint is assembled. It sounds a little like trying to make a dry joint under water. Thanks for pointing out that procedure. I noticed that in the instructions you sent and I figured the rapid oxidation of aluminum was the reason. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stacking Distance Question. More Information | Antenna | |||
Stupid question G5RV | Antenna | |||
Seperation question???? thanks | Antenna | |||
Yagi / Beam antenna theory question... | Antenna | |||
Question about attenuators ... | Antenna |