| Home |
| Search |
| Today's Posts |
|
#8
|
|||
|
|||
|
If the soffits are not metal, they will probably be dry and just about
anything will do for an insulator/standoff. When you said "eaves", some of us assumed you meant under the lowest edge of the roof. Technically, eaves are the under part of a roof that hangs over a wall. So the overhangs at the ends of a gable roof are also called eaves. An inverted vee at one of the ends, fed in the center, would be something to consider seriously if you have a gable roof. The center would be perhaps 18 feet above ground. On the other hand, if you have a hip roof, then a wire under the eaves will be entirely horizontal and approximately eight feet high. Such an antenna will exhibit a near-vertical radiation pattern and it will not be much of a performer for DX on the HF bands. Good luck Chuck Reg Edwards wrote: Just hang up some wire and see what happens. I make no predictions but you will probably be pleased with results. ---- Reg. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Passive Repeater | Antenna | |||
| The Long and Thin Vertical Loop Antenna. [ The Non-Resonance Vertical with a Difference ] | Shortwave | |||
| Grounding | Shortwave | |||
| No CounterPoise - Portable Antenna System | Shortwave | |||
| Yaesu FT-857D questions | Equipment | |||