Home |
Search |
Today's Posts |
#10
|
|||
|
|||
RTV Silicone And Coax Outer Jacket: Safe ?
Mike wrote:
Roy Lewallen wrote: The advice to avoid acetic-acid smelling RTV because of corrosion is passed along from person to person like an urban legend, but like an urban legend it's just about impossible to find anyone who's actually seen any corrosion result from its use. (A number of queries I've made over the years has produced just one, using a very early version of RTV.) I've used the acetic-acid smelling stuff for decades on a variety of metals including tinned and untinned wire, aluminum, nickel, and copper circuit boards, and never seen a hint of corrosion. But formulations vary widely, and my experience certainly isn't exhaustive. I'm not entirely convinced, though, that among the many formulations there aren't others, which don't have that smell, which might be corrosive to some materials. People who worry about this should buy an industrial product and stay with it, since there's a much better chance the formulation won't change in the future without notice. Roy Lewallen, W7EL I was visiting a local SGC dealer years ago as he was troubleshooting a brand new antenna tuner that was not working. When he opened the plastic case, that special RTV acidic smell almost knocked us over and all the tinned circuit board traces and exposed wiring were corroded and black. SGC claimed they used the wrong type of RTV on a batch of tuners that was not for electronics use. Most likely because they closed the cases before the silicone had cured, not realising they were trapping the acetic acid vapour inside. The same can happen in balun boxes and the like. It would be interesting to know if there have been *any* cases that didn't also involve some kind of closed situation, or possibly a layer that was too thick to let the vapour diffuse out. -- 73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB) http://www.ifwtech.co.uk/g3sek |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Silicone Grease In Coax Connectors; Comments And Questions ? | Shortwave | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |