Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing
as
I will exceed its what it's worth. . The case is very nice and not
beat
up, close to new so I believed it was a working unit. WRONG, but
I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something
should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to
be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

That link does not seem to work.
Anyone else have any luck??

....Dave



"Henry Kolesnik" wrote in message
...
Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

"Dave Edwards" wrote in message
. ..
That link does not seem to work.
Anyone else have any luck??

...Dave



Worked for me.. You have to be a member of the Yahoo group to get in and
download files.
Cheers
--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra


"Henry Kolesnik" wrote in message
...
Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."