| Home |
| Search |
| Today's Posts |
|
#18
|
|||
|
|||
|
A wrote:
Which means by simply lowering the lamp's applied voltage by 5% we increase its life by nearly 2 times! Yes, and sometimes it is worth doing this. I'll bet that the long life bulbs out there are made with a little more filament wire so the temperature is maybe (also) 5% lower, too. Which fits very nicely with the wartime conservation recommendations made by some of the tube manufacturers. Fine. Now, the second part of the question is: does it matter? If the filament life under normal operating voltages exceeds 20,000 hours, than dropping 5% and gaining an additional 18,000 hours, is probably not going to result in a noticeable improvement in life. Forever is forever. -Chuck Harris |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| IC706IIG warm-up problem | Equipment | |||
| Warm wishes to the yankees | CB | |||
| 24 hrs after daylight savings time, and no Seattle area radio station is transmitting the correct RDS time! | Shortwave | |||
| WARM IT UP | General | |||
| WARM IT UP | General | |||