I wonder if any one can help me scanning for me a DIAL of Geloso
transmitter.
The one I got is seriously disturbed by foreign paints.
--
Miguel Hernandez

I sent you the dial image and the Geloso Bulletin with the G.210TR description
to your private e-mail address.

73

Tony I0JX

Hello Tony I0JX,

I presume Miguel was happy to receive the dial scale he was looking for, so I
thank you on his behalf.

Tony I0JX

I can photograph mine if that will help.
Hank wd5jfr
"Antonio Vernucci" wrote in message
.. .
I wonder if any one can help me scanning for me a DIAL of Geloso
transmitter.
The one I got is seriously disturbed by foreign paints.
--
Miguel Hernandez

I sent you the dial image and the Geloso Bulletin with the G.210TR
description to your private e-mail address.

73

Tony I0JX

Hello Tony I0JX,

I presume Miguel was happy to receive the dial scale he was looking
for, so I thank you on his behalf.

Tony I0JX

I could use a good copy, I have the Geloso VFO
that's going into a homebrew transmitter--no dial
scale came with it.

Pete k1zjh

"Tio Pedro" ha scritto nel messaggio
news
I could use a good copy, I have the Geloso VFO
that's going into a homebrew transmitter--no dial
scale came with it.

Pete k1zjh

Just be sure that the dial scale matches the VFO type. Each VFO type has a
different scale, except the 4.101 and 4.102 which share the same scale.

73

Tony I0JX

"Antonio Vernucci" wrote in message
.. .
Just be sure that the dial scale matches the VFO type. Each VFO type has
a
different scale, except the 4.101 and 4.102 which share the same scale.

73

Tony I0JX

It is a 4/104 according to the label on the chassis.
6CL6 and a 5763. I assume this would drive a pair
of 6146 finals, or a 5894 in parallel, directly?

Pete

"
It is a 4/104 according to the label on the chassis.
6CL6 and a 5763. I assume this would drive a pair
of 6146 finals, or a 5894 in parallel, directly?

Pete


I see the dial scale is part number 1646, and sources for a scan
on the web?

Pete

It is a 4/104 according to the label on the chassis.
6CL6 and a 5763. I assume this would drive a pair
of 6146 finals, or a 5894 in parallel, directly?

Pete


I see the dial scale is part number 1646, and sources for a scan
on the web?

Pete


The VFO 4/101 tubes are 6J5+6AU6+6V6. It is used in the G.210 transmitter where
it drives a single 807. Dial is n. 1640

The VFO 4/102 tubes are 6J5+6AU6+6L6. It was used in no Geloso transmitter. It
can drive two 807s in parallel. Dial is n. 1640 (same as VFO 4/101)

The VFO 4/103 is for VHF. Dial is n. 1647

The VFO 4/104 tubes are 6CL6 + 5763. It is used in the G.212 transmitter where
it drives a single 807, and in the G.222 transmitter where it drives a single
6146. Dial is n. 1646

The VFO 4/105 (conversion type) tubes are 6U8+6AH6+6CL6. It is used in the G.223
transmitter where it drives a single 6146. Dial is n. 1657

I have a scan of dial n. 1640

I do not have a scan of dial n. 1646, but I could take it removing the dial from
my G.222 transmitter (provided that it is not too complex)

I do not think that the Geloso dials are on the web, but of course you may try.

73

Tony I0JX