Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old May 2nd 05, 12:21 AM
John Bartley
 
Posts: n/a
Default

Ron Lawrence KC4YOY wrote:

May 1st, 2005, 35 years ago today I bought my first "antique" radio.
I've created a little web page to tell the story.
http://radioheaven.homestead.com/35years.html


73, Ron


Hmmmm........ memories

Approximately 1972 or 1973, so I would have been 14 or 15 I guess. I
remember hooking up to the tractor, the trailer cart that we were using
to sell vegetables at my families roadside market garden. I drove a
couple of miles down the next concession to us, loaded in a 1920's
Columbia console, a lovely unit with two dors that slid on brass rails
to hide inside the cabinet. My brother and I (he's 6 years younger than
I) loaded it in, tied it down and headed home. Because I was too young
to drive on the roads (or so they thought - little did they know :-) ),
I had to take the back lanes and the fields to get onto the concession.
It's a wonder the radio made it! I still have it. It's in my dining
room, some 33 years later.

cheers

--
regards from ::

John Bartley
43 Norway Spruce Street
Stittsville, Ontario
Canada, K2S1P5

( If you slow down it takes longer
- does that apply to life also?)
  #2   Report Post  
Old May 2nd 05, 12:51 AM
Mike McGinn
 
Posts: n/a
Default

On Sun, 01 May 2005 19:21:13 -0400, John Bartley wrote:

Ron Lawrence KC4YOY wrote:

May 1st, 2005, 35 years ago today I bought my first "antique" radio. I've
created a little web page to tell the story.
http://radioheaven.homestead.com/35years.html


73, Ron


Hmmmm........ memories

Approximately 1972 or 1973, so I would have been 14 or 15 I guess. I
remember hooking up to the tractor, the trailer cart that we were using to
sell vegetables at my families roadside market garden. I drove a couple of
miles down the next concession to us, loaded in a 1920's Columbia console,
a lovely unit with two dors that slid on brass rails to hide inside the
cabinet. My brother and I (he's 6 years younger than I) loaded it in, tied
it down and headed home. Because I was too young to drive on the roads (or
so they thought - little did they know :-) ), I had to take the back lanes
and the fields to get onto the concession. It's a wonder the radio made
it! I still have it. It's in my dining room, some 33 years later.

cheers

Ahh 15, 16 , 17 and 18 years old. Thed early 70s.
I was down in the basement of the Staten Island Historical Society Museum
tinkering with the radio and phone collection. They had as I remember:
Several AK Model 20.
An AK Model 37 (AC powerered withj potted transformers made of green
metal) A Grebe-Eisman Synchrophase
Some GE units in wooden boxes (do not rememberany model info)
Several Victrolas.
Several Edison Cylinder Players
A real beautiful Regina Music Box that played 12 inch metal disks.
Much, mush more. A rela treasure trove.


--
Mike McGinn
Registered Linux User 377849
"more kidneys than eyes!"

  #3   Report Post  
Old May 2nd 05, 01:29 AM
Ron Lawrence KC4YOY
 
Posts: n/a
Default


A Grebe-Eisman Synchrophase


That's a strange combo, I wonder what it looks like?

Ron



  #4   Report Post  
Old May 2nd 05, 11:59 AM
Mike McGinn
 
Posts: n/a
Default

On Mon, 02 May 2005 00:29:24 +0000, Ron Lawrence KC4YOY wrote:


A Grebe-Eisman Synchrophase


That's a strange combo, I wonder what it looks like?

Ron

As I recall it was about 20 inches wide and about 8 deep, three tuning
dials mounted horizontally so they came through the panel, linked by a
chain drive aas I recall.

--
Mike McGinn
Registered Linux User 377849
"more kidneys than eyes!"

  #5   Report Post  
Old May 2nd 05, 09:27 PM
Alan Douglas
 
Posts: n/a
Default

Hi,

A Grebe-Eisman Synchrophase

That's a strange combo, I wonder what it looks like?

As I recall it was about 20 inches wide and about 8 deep, three tuning
dials mounted horizontally so they came through the panel, linked by a
chain drive aas I recall.


That's a Grebe Synchrophase. There was another company, Eisemann
Magneto Corp., that made some vaguely similar models, except that only
their rheostats were horizontal, not the tuning dials. Freed-Eisemann
(no relation) was also a well-known maker in the 1920s.

73, Alan


  #6   Report Post  
Old May 2nd 05, 10:25 PM
Ron Lawrence KC4YOY
 
Posts: n/a
Default

As I recall it was about 20 inches wide and about 8 deep, three tuning
dials mounted horizontally so they came through the panel, linked by a
chain drive aas I recall.


That's a Grebe Synchrophase.


I find it interesting how peoples memory works,
or doesn't depending on how you look at it.
I remember years ago, talking to an old guy that was a friend
of my fathers, when he found out I collected old radios he asked
if I had a Kent A****er... I told him he had the names switched
around and it was A****er Kent.
He just stood me down, that I must not know much about
old radios if I didn't know about Kent A****ers, he knew for
sure that was the name cause they had one when he was
growing up....


Ron



  #7   Report Post  
Old May 4th 05, 04:27 AM
Scott W. Harvey
 
Posts: n/a
Default

On Mon, 02 May 2005 16:27:45 -0400, Alan Douglas adouglasatgis.net
wrote:

Hi,

A Grebe-Eisman Synchrophase

That's a strange combo, I wonder what it looks like?

As I recall it was about 20 inches wide and about 8 deep, three tuning
dials mounted horizontally so they came through the panel, linked by a
chain drive aas I recall.


That's a Grebe Synchrophase. There was another company, Eisemann
Magneto Corp., that made some vaguely similar models, except that only
their rheostats were horizontal, not the tuning dials. Freed-Eisemann
(no relation) was also a well-known maker in the 1920s.

That must have been a pretty popular model back in the day.......I've
seen no less than five of them at swaps recently in various states of
(dis)repair.

-Scott

DO NOT REPLY TO THIS MESSAGE AT THE EMAIL ADDRESS ABOVE!
Instead, go to the following web page to get my real email address:
http://member.newsguy.com/~polezi/scottsaddy.htm
(This has been done because I am sick of SPAMMERS making my email unusable)

Thousands of vintage radio schematics available at The Schematic Bank:
http://techpreservation.dyndns.org/schematics/

Archive of Alt.Binaries.Pictures.Radio postings:
http://techpreservation.dyndns.org/abpr/

Universal Schematic Locator-finds schematics in Rider, Beitman, and Sams:
http://techpreservation.dyndns.org/U...ES/uslpage.htm
  #8   Report Post  
Old May 5th 05, 02:03 AM
Alan Douglas
 
Posts: n/a
Default

Hi,
Scott wrote:

That must have been a pretty popular model back in the day.......I've
seen no less than five of them at swaps recently in various states of
(dis)repair.


The Grebe Synchrophase was an amazing performer in its day, and
even now. I'd say it was the best unshielded TRF design ever made by
anyone. Grebe sold a lot of them, at $155.

73, Alan
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Imax ground plane question Vinnie S. CB 151 April 15th 05 05:21 AM
"Within 15 years AM/FM radio will become a curiosity" Mike Terry Broadcasting 23 April 14th 05 06:39 AM
Eighty years ago this week Mike Terry Shortwave 3 March 28th 05 06:16 PM
Hammie gets ten years Twistedhed CB 21 March 22nd 04 01:27 PM
Why You Don't Like The ARRL Louis C. LeVine Policy 803 January 23rd 04 01:12 AM


All times are GMT +1. The time now is 08:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017