My 2p, I mean 2c.

The job of an audio processor is to increase the 'average level' level
of audio without changing the waveform. This can be done at both audio
and RF frequencies (RF speech processors are commonly found in many
ham transceivers).

However, even in the best processors a certain level of distortion is
generated. It's down to the designer and the user to keep this to a
minimum.

Yes, a scope is handy but I doubt your typical processor user would
know what to do with one.

Hi Jay, long time no speak. I hope your antennas are selling well.

Phil
Transmitters 'R' Us
http://www.transmittersrus.com London, UK

On Jul 3, 12:45 pm, Transmitter Man wrote:
However, even in the best processors a certain level of distortion is
generated. It's down to the designer and the user to keep this to a
minimum.

How right you are Phil. The processor I have designed has about 0.4%
THD at 1KHz. As you know... this level of distortion is undetectable
to everyone but maybe a maestro... lol
Hope everything there is well...
www.telstar-electronics.com

On Tue, 03 Jul 2007 10:54:53 -0700, Telspam Electronics
wrote in
.com:

On Jul 3, 12:45 pm, Transmitter Man wrote:
However, even in the best processors a certain level of distortion is
generated. It's down to the designer and the user to keep this to a
minimum.

How right you are Phil. The processor I have designed has about 0.4%
THD at 1KHz.....


...... at 0dB compression. Why did you leave that part out, Brian?

BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

On Jul 3, 7:39 pm, Frank Gilliland wrote:
BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

Frank,
I knew you'd show up sooner or later... to spout your rhetorical
nonsense.
You're right on schedule... lol

On Tue, 03 Jul 2007 17:58:51 -0700, Telstar Electronics
wrote in
.com:

On Jul 3, 7:39 pm, Frank Gilliland wrote:
BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

Frank,
I knew you'd show up sooner or later... to spout your rhetorical
nonsense.
You're right on schedule... lol


And it took you less than 20 minutes to reply. But you didn't answer
my question: When are they going into full production? Cause when I
order mine I don't want to wait several months for you to build it. So
do you have them built, in stock, and ready to ship?

Frank Gilliland wrote:
On Tue, 03 Jul 2007 17:58:51 -0700, Telstar Electronics
wrote in
.com:

On Jul 3, 7:39 pm, Frank Gilliland wrote:
BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

Frank,
I knew you'd show up sooner or later... to spout your rhetorical
nonsense.
You're right on schedule... lol

And it took you less than 20 minutes to reply. But you didn't answer
my question: When are they going into full production? Cause when I
order mine I don't want to wait several months for you to build it. So
do you have them built, in stock, and ready to ship?

He has attempted everything from turn signals to splatter boxes, and
modulators.

No market for any of it.

On 04 Jul 2007 04:36:52 GMT, Steveo wrote in
:

Frank Gilliland wrote:
On Tue, 03 Jul 2007 17:58:51 -0700, Telstar Electronics
wrote in
.com:

On Jul 3, 7:39 pm, Frank Gilliland wrote:
BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

Frank,
I knew you'd show up sooner or later... to spout your rhetorical
nonsense.
You're right on schedule... lol

And it took you less than 20 minutes to reply. But you didn't answer
my question: When are they going into full production? Cause when I
order mine I don't want to wait several months for you to build it. So
do you have them built, in stock, and ready to ship?

He has attempted everything from turn signals to splatter boxes, and
modulators.

No market for any of it.


That's because he just wants to sell something. He doesn't care what
he sells because he thinks he can sell ice to an Eskimo. His marketing
scams might work with his mommy and daddy so he can live in their
basement, but it doesn't work with people who actually want something
that's worth their hard-earned money. Ten years of spamming the group
and he still hasn't figured that out. Not much slope to -his- learning
curve -- linear or not!

On Jul 3, 11:36 pm, Steveo wrote:
He has attempted everything from turn signals to splatter boxes, and
modulators.
No market for any of it.

Always good to hear from the hispanic landscaper, Stevarino.
Speaking of designs... how's you RF leafblower project coming?

"Steveo" wrote...

He has attempted everything from turn signals to splatter boxes, and
modulators.

No market for any of it.

No market for CB.

If his business is based purely on CB, then he must be
on to a loser from the start.


Regards,
Peter.

On Jul 3, 7:39 pm, Frank Gilliland wrote:
BTW, when does full production begin? I'm still waiting to buy one so
I can run it through the bench. And too bad about the dismal sales of
your non-linear linears..."LOL".

Frank... I asked you this before and never got a response. Why would
you want to spend your hard-earned money on a device that you believe
doesn't work? That makes absolutely no sense. Obviously, you know it
does function as advertised. Believe me... I don't need your money. In
fact... if I were to see you ordering one... I wouldn't sell it to
you.